Kit components
| DCS part | Description |
|---|---|
| 1340 | Passenger side block mount |
| 2136 | Driver side block mount |
| 1962 | Passenger side frame mount |
| 1963 | Driver side frame mount |
| — | Block mount bolts: M12-1.75 x 40 mm flange head |
| — | Frame mount bolts: M12-1.75 (passenger side), M14-2.0 (driver side, including one flat-head countersunk bolt) |
Before you begin
- The frame side mounts are slotted to allow for various engine positions.
- Automatic transmission trucks: move the transmission crossmember back to the rear set of holes normally used for manual transmission mounting.
- Manual transmission trucks: modify the crossmember so the engine and transmission can move far enough back to allow room for the mechanical fan.
- Leave enough room to install and remove the mechanical fan for servicing.
Install the block mounts
- Install the driver side and passenger side block mounts using the set of 4 holes located mid-engine.
- Use the provided M12-1.75 x 40 mm flange-head bolts. Torque to 44 lb-ft.
Set the engine in place
- Preassemble each engine side mount with its frame side mount as shown.
- Set the engine in place.
- Attach the mounts to the crossmember with the provided bolts: M12-1.75 on the passenger side, M14-2.0 on the driver side. The driver side uses one flat-head countersunk bolt.
- Torque to 44 lb-ft.